how to install sharkbite fittings on copper

Connect the male fitting to the female fitting using the supplied hose clamps. Done Check for the mark you made earlier to ensure that the pipe is well inserted for a secure connection.

Pin On Products

Be sure the pipe is free of scratches or debris and cut the pipe as cleanly and squarely as possibleMeasure mark the insertion depth.

. Squeeze the handle to compress the release collar which is what makes the fitting let go of the pipe. Now turn on the water and check the connection. Tighten the clamping ring on the male fitting.

2 Make sure the fitting is tightened until the threads are flush with the surface of the pipe. There is no need for special tools or clamps. Browse Our Selection of Fittings to Strengthen Your Plumbing Systems.

Use your SharkBite Deburr Gauge Tool to measure and mark the insertion depth on your pipe. How to install SharkBite fittings on copper pipe Choose the correct sized pipe. Position the pipe side prong so its fully seated on the pipe.

Once youve cut the pipe so that its square use the SharkBite Depth Deburr Gage to mark insert depth on your pipe. Making quality connections between copper pipe and SharkBite fittings is easy. Pull out collar from fitting using needle-nose pliers.

CONNECTING THE FITTINGS 1. The second step is about cutting the pipe cleanly and squarely. Learn how to install SharkBite push-to-connect fittings fast with this helpful How-To Video.

Now push pipe within fitting using twisting motion and until you get to hear that click sound. Inspect and clean the end of the pipe and the fittinginstall the new copper pipe into the standard coupling and then slide the slip coupling onto the other end of the pipeinstall the pipe again making sure to fully seat the pipe into the sharkbite fitting. Cut pipe cleanly squarely.

Pull the fitting to remove it from the pipe. To get started identify the pipe material. Push the fitting to the insertion mark you just made on the pipe.

Once it touches the pipe stop you will hear a click sound from the fitting. How to install sharkbite fittings on copper fittings. Once installed the SharkBite joint will look like a.

Hold the SharkBite fitting and gently push the pipe through it with a slight twist. Measure mark the insertion depth. Installing a Tectite Sharkbite Slip Tee onto a copper water pipe lineNOTE De- burr and Clean the inside AND outside of pipe after cuttingTo Purchase.

You should then mark each pipe. Plastic Bag Carton Plywood. Ad Call Now To Speak With Our Dedicated Customer and Product Support Teams.

Cut the copper pipe cleanly and squarely. Installing a Sharkbite fitting so I wont have solder old copper pipe under the kitchen sink About Press Copyright Contact us Creators Advertise Developers Terms Privacy. You should then mark each pipe joint on end to show where the SharkBite fitting will fit.

The first step in installing the SharkBite fitting on the copper pipe is about the. 1 Use a tapered wrench to tighten the fitting onto the pipe. How To Install SharkBite Brass Push-To-Connect FittingsIdentify the pipe material.

Mark it with scribe or pencil and ensure it is visible allowing you to install correctly the SharkBite fitting. The SharkBite Universal brass push-to-connect fittings create a seamless and easy transition between. Place the fitting side above the barrel of the SharkBite fitting.

Professional how to install sharkbite fittings on copper fittings Manufacturer is located China including Copper Sharkbite FittingSolderless Sharkbite FittingsEnd Feed Sharkbite Fittings etc. Rotate the fitting if necessary to help remove it from the pipe. Just push the tube into the fitting until you reach the depth mark.

Once done turn on the water supply and observe for leaks on the joint. Take 1 pipe from cut end.

Pin On Products